Select:
DIN
EN
ISO
GB/T
UNI
NFE
ASME
WS
norm
搜索
搜索
x

W-02632 Ripp,高强六角法兰锁紧螺栓-细牙

Hexagon head serrated screw with flange
产品摘要:

供货标准:W-02632 RIPP

参考标准:_

产品材质:碳钢

产品涂层:P3E

产品性能:ST-10.9

广告地址:
W02632 Ripp
W-02632
02632_
W02632 Ripp
W-02632
02632_
产品描述
参数
近似标准
产品特点
其他相关
右侧栏

锁紧原理

螺栓拧紧过程中,防松牙纹挤压螺栓下支撑面区域内的基材表面,引起基材表面塑性变形,使表面硬化。装配完成后,螺栓下支撑面区域内的基材不会再出现明显的沉降,防松牙纹有效的限制了螺栓连接的沉降量,从而减少了安装预紧力的损失。

 

基础信息

  Standards    WN 263
  Material    Steel
  Property class    10.9
  Surface    Zinc nickel
  Corrosion protection period    720 h
  Drive type    Outer hexagon
  Head type    Hexagon head with flange
  Locking device operating principle    Ribs
  Locking function    Locking against self-loosening by mechanical interlocking
  Area of application    Utility vehicle construction
  RoHS-compliant    Yes

 

产品尺寸

diameter x pitch (d1) Length (l1) Head diameter (dc) Head height (k1) External drive (s1) Thread format  Design 
M12 x 1.5  25 mm  24 mm  10 mm  WS17  Fine pitch thread Threaded to head 
M12 x 1.5  30 mm  24 mm  10 mm  WS17  Fine pitch thread Threaded to head 
M12 x 1.5  35 mm  24 mm  10 mm  WS17  Fine pitch thread Threaded to head 
M12 x 1.5  40 mm  24 mm  10 mm  WS17  Fine pitch thread Threaded to head 
M12 x 1.5  45 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M12 x 1.5  50 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M12 x 1.5  55 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M12 x 1.5  60 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M12 x 1.5  65 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M12 x 1.5  70 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M12 x 1.5  75 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M14 x 1.5  30 mm  27.5 mm  12 mm  WS19  Fine pitch thread Threaded to head 
M14 x 1.5  35 mm  27.5 mm  12 mm  WS19  Fine pitch thread Threaded to head 
M14 x 1.5  40 mm  27.5 mm  12 mm  WS19  Fine pitch thread Threaded to head 
M14 x 1.5  45 mm  27.5 mm  12 mm  WS19  Fine pitch thread Threaded to head 
M14 x 1.5  50 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  55 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  60 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  65 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  70 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  75 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  80 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  100 mm  27.5 mm  14 mm  WS19  Fine pitch thread  With shaft 
M16 x 1.5  35 mm  31 mm  14 mm  WS22  Fine pitch thread Threaded to head 
M16 x 1.5  40 mm  31 mm  14 mm  WS22  Fine pitch thread Threaded to head 
M16 x 1.5  45 mm  31 mm  14 mm  WS22  Fine pitch thread Threaded to head 
M16 x 1.5  50 mm  31 mm  14 mm  WS22  Fine pitch thread Threaded to head 
M16 x 1.5  55 mm  31 mm  14 mm  WS22  Fine pitch thread  With shaft 
M16 x 1.5  60 mm  31 mm  14 mm  WS22  Fine pitch thread  With shaft 
M16 x 1.5  65 mm  31 mm  14 mm  WS22  Fine pitch thread  With shaft 
M16 x 1.5  70 mm  31 mm  14 mm  WS22  Fine pitch thread With shaft 
             

 

供货范围

材料 材质 性能等级 涂层简称 表面处理 常规供货范围 RoHS 其他
碳钢 ST 10.9 P3E 电镀锌镍合金 M12X1.5-M16X1.5 Yes  
               

 

*   本表所示W-02632高强六角法兰锁紧螺栓细牙数据仅供参考,与产品相关的标准、规格、涂层、性能等具体参数,请以我司实际报价和供货为准。    

*   符合以下情形,需要与我司销售人员咨询:

    本表所示数据仅为常规供货范围,特殊订货产品,请咨询。

    涉及企业标准验收、特殊质量协议及要求、特殊证明,请咨询。

关键词:
高强六角法兰锁紧螺栓
细牙螺栓
高强螺栓
锁紧螺栓
内六角螺栓
法兰螺栓
2632
扫二维码用手机看
未找到相应参数组,请于后台属性模板中添加

HEXAGON HEAD SERRATED SCREW WITH FLANGE
Zinc-nickel frame screw for commercial vehicles, transparent passivated (P3E) with seal, from M12 with fine thread.

Standards: WN 263
Material: Steel
Property class: 10.9
Surface: Zinc nickel
Corrosion protection period: 720 h
Drive type: Outer hexagon
Head type: Hexagon head with flange
Locking device operating principle: Ribs
Locking function: Locking against self-loosening by mechanical interlocking
Area of application: Utility vehicle construction
RoHS-compliant: Yes

 

Working principle of locking ribs:

During tightening, the locking ribs roll the counter-material in the area of the bolt contact surface. This causes a plastic deformation that hardens the surface. No significant settling is determined at the end of tightening. The locking ribs limit the amount of settling of the connection and therefore reduce the loss of pretensioning force.

 

Chromium(VI)-free

Complies with the EU End of Life Vehicles Directive

 

Corrosion resistance

Approx. 720 hours of base metal corrosion according to DIN EN ISO 9227-NSS

The specified corrosion resistances apply for the corrosion tests according to DIN EN ISO 9227-NSS (salt spray mist testing), at the earliest 24 h after coating in the as coated state, i.e. before sorting, packaging, transporting and/or assembly. These values can be reduced through inevitable handling and assembly processes. A transfer of the corrosion resistances from the salt spray mist test to real assembly and operating conditions is not possible in the majority of cases. When designing a connection, both the combined materials and any coatings and the environmental conditions during operation must be considered by the designer when selecting a suitable corrosion protection coating.

 

注:以上信息源于wüerth industry.具体产品详情请咨询销售人员并以我司实际供货为准。

    紧固件实用工具    

> WASI 常见表面涂层简介

> WASI 标准件的样册查询

> 紧固件产品标准对照查询

> 紧固件制造交付标准对比

> 双相不锈钢紧固件的介绍

    马上关注我们吧    

如想了解更多

请扫描二维码

 

 

产品描述
参数
近似标准
产品特点
其他相关
右侧栏

锁紧原理

螺栓拧紧过程中,防松牙纹挤压螺栓下支撑面区域内的基材表面,引起基材表面塑性变形,使表面硬化。装配完成后,螺栓下支撑面区域内的基材不会再出现明显的沉降,防松牙纹有效的限制了螺栓连接的沉降量,从而减少了安装预紧力的损失。

 

基础信息

  Standards    WN 263
  Material    Steel
  Property class    10.9
  Surface    Zinc nickel
  Corrosion protection period    720 h
  Drive type    Outer hexagon
  Head type    Hexagon head with flange
  Locking device operating principle    Ribs
  Locking function    Locking against self-loosening by mechanical interlocking
  Area of application    Utility vehicle construction
  RoHS-compliant    Yes

 

产品尺寸

diameter x pitch (d1) Length (l1) Head diameter (dc) Head height (k1) External drive (s1) Thread format  Design 
M12 x 1.5  25 mm  24 mm  10 mm  WS17  Fine pitch thread Threaded to head 
M12 x 1.5  30 mm  24 mm  10 mm  WS17  Fine pitch thread Threaded to head 
M12 x 1.5  35 mm  24 mm  10 mm  WS17  Fine pitch thread Threaded to head 
M12 x 1.5  40 mm  24 mm  10 mm  WS17  Fine pitch thread Threaded to head 
M12 x 1.5  45 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M12 x 1.5  50 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M12 x 1.5  55 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M12 x 1.5  60 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M12 x 1.5  65 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M12 x 1.5  70 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M12 x 1.5  75 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M14 x 1.5  30 mm  27.5 mm  12 mm  WS19  Fine pitch thread Threaded to head 
M14 x 1.5  35 mm  27.5 mm  12 mm  WS19  Fine pitch thread Threaded to head 
M14 x 1.5  40 mm  27.5 mm  12 mm  WS19  Fine pitch thread Threaded to head 
M14 x 1.5  45 mm  27.5 mm  12 mm  WS19  Fine pitch thread Threaded to head 
M14 x 1.5  50 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  55 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  60 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  65 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  70 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  75 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  80 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  100 mm  27.5 mm  14 mm  WS19  Fine pitch thread  With shaft 
M16 x 1.5  35 mm  31 mm  14 mm  WS22  Fine pitch thread Threaded to head 
M16 x 1.5  40 mm  31 mm  14 mm  WS22  Fine pitch thread Threaded to head 
M16 x 1.5  45 mm  31 mm  14 mm  WS22  Fine pitch thread Threaded to head 
M16 x 1.5  50 mm  31 mm  14 mm  WS22  Fine pitch thread Threaded to head 
M16 x 1.5  55 mm  31 mm  14 mm  WS22  Fine pitch thread  With shaft 
M16 x 1.5  60 mm  31 mm  14 mm  WS22  Fine pitch thread  With shaft 
M16 x 1.5  65 mm  31 mm  14 mm  WS22  Fine pitch thread  With shaft 
M16 x 1.5  70 mm  31 mm  14 mm  WS22  Fine pitch thread With shaft 
             

 

供货范围

材料 材质 性能等级 涂层简称 表面处理 常规供货范围 RoHS 其他
碳钢 ST 10.9 P3E 电镀锌镍合金 M12X1.5-M16X1.5 Yes  
               

 

*   本表所示W-02632高强六角法兰锁紧螺栓细牙数据仅供参考,与产品相关的标准、规格、涂层、性能等具体参数,请以我司实际报价和供货为准。    

*   符合以下情形,需要与我司销售人员咨询:

    本表所示数据仅为常规供货范围,特殊订货产品,请咨询。

    涉及企业标准验收、特殊质量协议及要求、特殊证明,请咨询。

关键词:
高强六角法兰锁紧螺栓
细牙螺栓
高强螺栓
锁紧螺栓
内六角螺栓
法兰螺栓
2632
扫二维码用手机看
未找到相应参数组,请于后台属性模板中添加

HEXAGON HEAD SERRATED SCREW WITH FLANGE
Zinc-nickel frame screw for commercial vehicles, transparent passivated (P3E) with seal, from M12 with fine thread.

Standards: WN 263
Material: Steel
Property class: 10.9
Surface: Zinc nickel
Corrosion protection period: 720 h
Drive type: Outer hexagon
Head type: Hexagon head with flange
Locking device operating principle: Ribs
Locking function: Locking against self-loosening by mechanical interlocking
Area of application: Utility vehicle construction
RoHS-compliant: Yes

 

Working principle of locking ribs:

During tightening, the locking ribs roll the counter-material in the area of the bolt contact surface. This causes a plastic deformation that hardens the surface. No significant settling is determined at the end of tightening. The locking ribs limit the amount of settling of the connection and therefore reduce the loss of pretensioning force.

 

Chromium(VI)-free

Complies with the EU End of Life Vehicles Directive

 

Corrosion resistance

Approx. 720 hours of base metal corrosion according to DIN EN ISO 9227-NSS

The specified corrosion resistances apply for the corrosion tests according to DIN EN ISO 9227-NSS (salt spray mist testing), at the earliest 24 h after coating in the as coated state, i.e. before sorting, packaging, transporting and/or assembly. These values can be reduced through inevitable handling and assembly processes. A transfer of the corrosion resistances from the salt spray mist test to real assembly and operating conditions is not possible in the majority of cases. When designing a connection, both the combined materials and any coatings and the environmental conditions during operation must be considered by the designer when selecting a suitable corrosion protection coating.

 

注:以上信息源于wüerth industry.具体产品详情请咨询销售人员并以我司实际供货为准。

    紧固件实用工具    

> WASI 常见表面涂层简介

> WASI 标准件的样册查询

> 紧固件产品标准对照查询

> 紧固件制造交付标准对比

> 双相不锈钢紧固件的介绍

    马上关注我们吧    

如想了解更多

请扫描二维码

 

 

1/1
浏览量:
0

W-02632 Ripp,高强六角法兰锁紧螺栓-细牙

Hexagon head serrated screw with flange
零售价
0.0
市场价
0.0
浏览量:
0
产品编号
B005
数量
-
+
1
详情
近似标准
产品特点
其他相关
右侧栏
英文名称:
Hexagon head serrated screw with flange
产品摘要:

供货标准:W-02632 RIPP

参考标准:_

产品材质:碳钢

产品涂层:P3E

产品性能:ST-10.9

锁紧原理

螺栓拧紧过程中,防松牙纹挤压螺栓下支撑面区域内的基材表面,引起基材表面塑性变形,使表面硬化。装配完成后,螺栓下支撑面区域内的基材不会再出现明显的沉降,防松牙纹有效的限制了螺栓连接的沉降量,从而减少了安装预紧力的损失。

 

基础信息

  Standards    WN 263
  Material    Steel
  Property class    10.9
  Surface    Zinc nickel
  Corrosion protection period    720 h
  Drive type    Outer hexagon
  Head type    Hexagon head with flange
  Locking device operating principle    Ribs
  Locking function    Locking against self-loosening by mechanical interlocking
  Area of application    Utility vehicle construction
  RoHS-compliant    Yes

 

产品尺寸

diameter x pitch (d1) Length (l1) Head diameter (dc) Head height (k1) External drive (s1) Thread format  Design 
M12 x 1.5  25 mm  24 mm  10 mm  WS17  Fine pitch thread Threaded to head 
M12 x 1.5  30 mm  24 mm  10 mm  WS17  Fine pitch thread Threaded to head 
M12 x 1.5  35 mm  24 mm  10 mm  WS17  Fine pitch thread Threaded to head 
M12 x 1.5  40 mm  24 mm  10 mm  WS17  Fine pitch thread Threaded to head 
M12 x 1.5  45 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M12 x 1.5  50 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M12 x 1.5  55 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M12 x 1.5  60 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M12 x 1.5  65 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M12 x 1.5  70 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M12 x 1.5  75 mm  24 mm  10 mm  WS17  Fine pitch thread  With shaft 
M14 x 1.5  30 mm  27.5 mm  12 mm  WS19  Fine pitch thread Threaded to head 
M14 x 1.5  35 mm  27.5 mm  12 mm  WS19  Fine pitch thread Threaded to head 
M14 x 1.5  40 mm  27.5 mm  12 mm  WS19  Fine pitch thread Threaded to head 
M14 x 1.5  45 mm  27.5 mm  12 mm  WS19  Fine pitch thread Threaded to head 
M14 x 1.5  50 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  55 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  60 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  65 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  70 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  75 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  80 mm  27.5 mm  12 mm  WS19  Fine pitch thread  With shaft 
M14 x 1.5  100 mm  27.5 mm  14 mm  WS19  Fine pitch thread  With shaft 
M16 x 1.5  35 mm  31 mm  14 mm  WS22  Fine pitch thread Threaded to head 
M16 x 1.5  40 mm  31 mm  14 mm  WS22  Fine pitch thread Threaded to head 
M16 x 1.5  45 mm  31 mm  14 mm  WS22  Fine pitch thread Threaded to head 
M16 x 1.5  50 mm  31 mm  14 mm  WS22  Fine pitch thread Threaded to head 
M16 x 1.5  55 mm  31 mm  14 mm  WS22  Fine pitch thread  With shaft 
M16 x 1.5  60 mm  31 mm  14 mm  WS22  Fine pitch thread  With shaft 
M16 x 1.5  65 mm  31 mm  14 mm  WS22  Fine pitch thread  With shaft 
M16 x 1.5  70 mm  31 mm  14 mm  WS22  Fine pitch thread With shaft 
             

 

供货范围

材料 材质 性能等级 涂层简称 表面处理 常规供货范围 RoHS 其他
碳钢 ST 10.9 P3E 电镀锌镍合金 M12X1.5-M16X1.5 Yes  
               

 

*   本表所示W-02632高强六角法兰锁紧螺栓细牙数据仅供参考,与产品相关的标准、规格、涂层、性能等具体参数,请以我司实际报价和供货为准。    

*   符合以下情形,需要与我司销售人员咨询:

    本表所示数据仅为常规供货范围,特殊订货产品,请咨询。

    涉及企业标准验收、特殊质量协议及要求、特殊证明,请咨询。

关键词:
高强六角法兰锁紧螺栓
细牙螺栓
高强螺栓
锁紧螺栓
内六角螺栓
法兰螺栓
2632
未找到相应参数组,请于后台属性模板中添加

HEXAGON HEAD SERRATED SCREW WITH FLANGE
Zinc-nickel frame screw for commercial vehicles, transparent passivated (P3E) with seal, from M12 with fine thread.

Standards: WN 263
Material: Steel
Property class: 10.9
Surface: Zinc nickel
Corrosion protection period: 720 h
Drive type: Outer hexagon
Head type: Hexagon head with flange
Locking device operating principle: Ribs
Locking function: Locking against self-loosening by mechanical interlocking
Area of application: Utility vehicle construction
RoHS-compliant: Yes

 

Working principle of locking ribs:

During tightening, the locking ribs roll the counter-material in the area of the bolt contact surface. This causes a plastic deformation that hardens the surface. No significant settling is determined at the end of tightening. The locking ribs limit the amount of settling of the connection and therefore reduce the loss of pretensioning force.

 

Chromium(VI)-free

Complies with the EU End of Life Vehicles Directive

 

Corrosion resistance

Approx. 720 hours of base metal corrosion according to DIN EN ISO 9227-NSS

The specified corrosion resistances apply for the corrosion tests according to DIN EN ISO 9227-NSS (salt spray mist testing), at the earliest 24 h after coating in the as coated state, i.e. before sorting, packaging, transporting and/or assembly. These values can be reduced through inevitable handling and assembly processes. A transfer of the corrosion resistances from the salt spray mist test to real assembly and operating conditions is not possible in the majority of cases. When designing a connection, both the combined materials and any coatings and the environmental conditions during operation must be considered by the designer when selecting a suitable corrosion protection coating.

 

注:以上信息源于wüerth industry.具体产品详情请咨询销售人员并以我司实际供货为准。

    紧固件实用工具    

> WASI 常见表面涂层简介

> WASI 标准件的样册查询

> 紧固件产品标准对照查询

> 紧固件制造交付标准对比

> 双相不锈钢紧固件的介绍

    马上关注我们吧    

如想了解更多

请扫描二维码

 

 

相关产品

W-4144,高强内六角圆柱头法兰锁紧螺栓
W-0274,六角法兰锁紧螺栓
W-4144 ,高强内六角圆柱头法兰锁紧螺栓
W-02633 Ribs,高强六角法兰锁紧螺栓 FL100
W-026393 RIPP,高强法兰端面带齿螺母
WASI

 全国热线电话: 022-8882-9200

2019 万喜(天津)紧固件有限公司版权所有

津公网安备 12011202000453号